FAQ

| Open All

Problem: 0X0000007E (0XC0000005, 0XF74F97F0, 0XF79F2044, 0XF79F1D44) Acpi.sys – Address F74F97F0 base at F74E2000, DateStamp 3d6dd69fAnswer: RAM is faulty.Problem: Do not install VOIP.Answer: CE260 does not have VOIP, installing may cause error.Problem: WLan driver is not working in the UMPC 1st driver. Answer: Install WLan driver using UMPC 2nd driver.Problem: Audio & Chipset driver is not working in the UMPC 2nd driver.Answer: Install Audio & Chipset driver using UMPC 1st driver.Problem: Can I upgrade the RAM to 2GB?Answer: No, Microsoft does not allow UMPC vendor to sell Notebook with over 1GB memory module. Therefore, Astone BIOS has limitation with this chipset on CE260, only can read 1GB memory.

You only need to take a few precautions to enjoy your notebook battery longer. There are two different levels on which this can be achieved: the battery life and the battery life span. The battery life is the time you can work on a single fully-charged battery. The battery life span is the time a battery works before it will be completely out of function. Next to that, buying a second battery will increase your mobility and double the time you can stay away from the mains. For some models, there are also batteries with a higher capacity which will offer you a longer battery life.

Keeping a long battery life

You must realize that some devices use quite some power, such as:

The processor (CPU)
The LCD panel
Hard disk and optical drive (e.g. a DVD writer)
Video chipset (on high-end notebooks)

To get a longer battery life it?s best to reduce the power consumption of these devices. On modern notebooks, much of this is already arranged automatically. For example, the high-end video chips reduce their functionality and speed when they are not under load. The same goes for most processors. Some precautions require manual settings:

Set the brightness of your screen to the lowest setting you find comfortable.
Avoid using CDs and DVDs while working on battery.
Avoid heavy tasks (e.g. playing games, video editing) while working on battery.
Make sure to use an appropriate power scheme in Windows.
Turn off devices that you do not use, like wireless LAN or Bluetooth.
If your system is equipped with an ECO-button, enable the ECO-status.

Maintaining battery life spanTo reduce the battery wear, there are a few simple precautions to take

Always charge your battery to 100%.
Fully charge a new battery before its first use. Next, completely discharge it and recharge it completely.
Avoid excessive heat.
Work with the AC Adapter plugged in as much as you can.

The above precautions will not only improve the battery life span, but your battery will also get a longer battery life per charge.

How to completely discharge your battery

Normally, your system will enter stand-by or hibernation if the battery drops below a certain level. This is to avoid losing data you are working on. However, to completely discharge your battery you need to avoid such action. To do that, reboot your system and enter the BIOS setup (usually you need to press when booting the notebook). Leave the system running with the BIOS setup showing until it shuts down. At that moment, the battery will be completely empty. Alternatively, some systems have an option "Calibrate battery" or "Refresh battery" in the BIOS. You can use this option to perform a complete discharge of your battery. If your system uses a NiMH battery, make sure to repeat charging, discharging and recharging on a regular interval. For a Li-Ion battery, it is not needed to repeat this cycle often, but if you notice that your battery life is degraded it is recommended.

Data Loss Prevention

What can you do when you lose data?

If your drive is making unusual noise, shut it down immediately and do not power up again.
Calmly assess the situation. Hasty attempts to fix the problem can often result in further damage and data loss.
Stop writing to any media (including hard drives) that may be involved in data loss. Note that running most software (for example, Internet Explorer) means writing new data to your drive (and possibly overwriting the lost data you are seeking).
Eliminate the simplest possible causes, such as loose cables or bad device drivers.
Write down all symptoms of failure and all recent actions and events involving your computer.
Find your contingency plan and proceed through its steps.
Avoid do-it-yourself solutions. Do-it-yourself software may make extensive use of the problem drive, potentially causing complete failure.

What is data loss?

The majority of computer users will encounter data loss at some time. Data loss is usually characterized by one or more of the following:
You are unable to access any data from a previously functioning computer system or backup.
Data has accidentally been erased or data control structures have been overwritten.
Data has been corrupted or made inaccessible.

What causes data loss?

Among other causes, data loss can be attributed to system or human error, adverse environmental conditions and device failure.

Human causes of data loss include intentional or accidental deletion or overwriting of files. Virus damage, operating system or application software bugs, or failed upgrades may also cause data loss.

Common physical causes of data loss include power loss or power surge, overheating, electrostatic ("static") discharge and any kind of physical damage to the storage device or medium.

How can you prevent data loss?

1. Back up your files. External drives are an excellent choice for this backup task. Then test and verify your backup.

2. Use Windows XP System Restore Points before making any significant changes to your system.

3. Write a contingency plan and practice restoring your data in case of problems. Your contingency plan should require, as

a minimum:

Locating all available backups, including dates and types of backup
Listing and locating all original software packages, detailing updates since the original installation
Locating and making ready an alternate computer

4. Never upgrade software or hardware without a complete, verified backup available in case you need to restore data.

5. Document your systems and archive original copies of your software in a safe place.

6. Ensure proper environmental conditions (stable temperature, humidity and cleanliness) and proper handling to avoid

static discharge and accidental dropping.

7. Delete unused files and applications. Use a disc defragmenter.

8. Physically secure systems from intruders.

9. Deploy firewalls and virus protection.

10. Prepare for physical disasters, including use of offsite storage for backup.

Download Main Page

File Name: SeaTools for Windows.exeFile Size: 5.5 MB

SeaTools for Windows is a comprehensive, easy-to-use diagnostic tool that helps you quickly determine the condition of the disc drive in your external hard drive, desktop or notebook computer. It includes several tests that will examine the physical media on your Seagate or Maxtor disc drive and any other non-Seagate disc drive.

SeaTools for Windows tests USB, 1394, ATA (PATA/IDE), SATA and SCSI drives. It installs onto your system. SeaTools for Windows is completely data safe.

Supports these languages:

English, Français, Deutsch, Español, Italiano, 中文(简体), 中文（繁體）, 日本語 (v1.1.0.19)
System Requirements for Running SeaTools for Windows

You can run SeaTools for Windows to test your disc drive if your PC has:

Microsoft Windows Vista, XP or 2000.
Microsoft .NET Framework v2.0 - Available for download (approximately 23 MB) from www.microsoft.com. Search the site for .NET 2.0 or go directly there.
VGA 800x600 or greater graphics capability

Use the + key combination to toggle between all of the the supported screen resolutions. This includes the native resolution of 800 x 480.

| Open All

EATECH